WE KNOW MAGNETS

630-313-4769

Over 200 Million Magnets Sold!

Round Base Magnets

Round Base Magnets Assemblies are a high strength and low cost option for a huge variety of applications. The assemblies are usually produced with a magnet set into other non-magnetic material. They are made this way to channel and increase the magnetic force in a particular direction.

Magnetic assemblies are commonly used in a wide variety of fixtures, latches, signs and displays, and in the attachment points of products with magnetic bases like light bars, sirens, lights and lanterns. Additionally, they are used for:

  • Antenna Mounts
  • Emergency light/ & Sign and banner/ & Vehicles flag Holders
  • Tow light kits
  • Work lamp bases

Argus’s round base magnet assemblies are either made from neodymium magnets or ceramic magnets and are combined with steel cups. They are magnetized together so that their holding force is much stronger than just a single magnet. Round base magnets are either coated with nickel or chrome, unless you would specify something different.

rb_chartNEW

RB Assembly OD Cap Hole Cup Height Magnet Height Air Gap Finish Pull (Lbs) Pcs/  Box Lbs/ Box
RB 40.187N 1.41″ 0.187″ 0.270″ 0.195″ 0.012″ Nickel Plated 15 138 10
RB 40.250N 1.41″ 0.250″ 0.270″ 0.195″ 0.012″ Nickel Plated 15 138 10
RB 50.187N 2.03″ 0.187″ 0.30″ 0.240″ 0.012″ Nickel Plated 35 90 15
RB 50.200N 2.03″ 0.200″ 0.30″ 0.240″ 0.012″ Nickel Plated 35 90 15
RB 50.500BX 2.03″ 0.500″ 0.30″ 0.240″ 0.012″ Black Epoxy 35 90 15
RB 60.250N 2.36″ 0.250″ 0.35″ 0.275″ 0.012″ Nickel Plated 50 70 16
RB 60.500BX 2.36″ 0.500″ 0.35″ 0.275″ 0.012″ Black Epoxy 50 70 16
RB 70.280N 2.60″ 0.280″ 0.37″ 0.280″ 0.012″ Nickel Plated 75 56 19
RB 80.280N 3.20″ 0.280″ 0.43″ 0.330″ 0.012″ Nickel Plated 90 55 32
RB 80.375N 3.20″ 0.375″ 0.43″ 0.330″ 0.012″ Nickel Plated 90 55 32
RB 80.375Zn 3.20″ 0.375″ 0.43″ 0.330″ 0.012″ Zinc Plated 90 55 32
RB 80.375BX 3.20″ 0.375″ 0.43″ 0.330″ 0.012″ Black Epoxy 90 55 32
RB 80.500N 3.20″ 0.500″ 0.43″ 0.330″ 0.012″ Nickel Plated 90 55 32
RB80 w/0.25″Slot 3.20″ 0.811 0.43″ 0.330″ 0.012″ Black Epoxy 90 55 32
RB 90.375N 3.88″ 0.375″ 0.52″ 0.420″ 0.020″ Nickel Plated 120 32 47
RB 90.375BX 3.88″ 0.375″ 0.52″ 0.420″ 0.020″ Black Epoxy 120 32 47
RB 100.500N 4.90″ 0.500″ 0.52″ 0.420″ 0.020″ Nickel Plated 200 25 40
RB 100.500BX 4.90″ 0.500″ 0.52″ 0.420″ 0.020″ Black Epoxy 200 25 40